G. Angelopoulos Publication List

2010 - now 

 

A. Christogerou, T. Kavas, G. N. Angelopoulos, "Synergy of boron-containing solid wastes and fructose for the production of lightweight aggregates. Microstructure and Properties", Waste and Biomass Valorization, 2013, DOI 10.1007/s12649-013-9269-0.  

R.I. Iacobescu, Y. Pontikes, D. Koumpouri , G.N. Angelopoulos, "HYDRAULIC AND LEACHING BEHAVIOUR OF BELITE CEMENTS PRODUCED WITH ELECTRIC ARC FURNACE STEEL SLAG AS RAW MATERIAL", Ceramics-Silikáty, 2013, 57 (2), 126-132. 

R.I. Iacobescu, Y. Pontikes, D. Koumpouri , G.N. Angelopoulos, "Synthesis, characterization and properties of calcium ferroaluminate belite cements produced with electric arc furnace steel slag as raw material", Cement & Concrete Composites, 2013, 44, 1–8. 

E. Bernardo, Y. Pontikes, G.N. Angelopoulos, "Low temperature conversion of waste-derived glass into sintered glass-ceramics", accepted for publication. 

S. Onisei, Y. Pontikes, T. Van Gerven, G. N. Angelopoulos, T. Velea, V. Predica, P. Moldovan, "Synthesis of inorganic polymers using fly ash and primary lead slag", Journal of Hazardous Materials, 2012, 205-206, 101-110.  

A. Christogerou, G.N. Angelopoulos, "Utilization of Industrial Mining by-products for the production of Heavy Clay Ceramics", Mineral Wealth, 2011, 162, 9-22. 

R. I. Iacobescu, D. Koumpouri, Y. Pontikes, R. Şaban, G. N. Angelopoulos, "Valorisation of Electric Arc Furnace Steel Slag as raw material for low energy belite cements", Journal of Hazardous Materials, 2011, 196, 287-294. 

R. I. Iacobescu, D. Koumpouri, Y. Pontikes, R. Şaban, G. N. Angelopoulos, "Hydraulic properties of ferroalumino-belite cement based on electric arc furnace steel slag", The Bulletin of the Polytechnic Institute from Iaşi, Section of materials science and engineering ISSN 1453-1690, Tomul LVII (LXI) Fasc. 3, B+, 2011, 185-194.  

R. I. Iacobescu, D. Koumpouri, Y. Pontikes, R. Şaban, G. N. Angelopoulos, "Utilization of EAF metallurgical slag in “green” belite cement", UPB Scientific Bulletin, Series B: Chemistry and Materials Science, 2011, 73 (1), 187-194. 

I. Kookos, Y. Pontikes, G. N. Angelopoulos, G. Lyberatos, "Classical and alternative fuel mix optimization in cement production using mathematical programming", Fuel, 2011. 90 (3), 1277-1284. 

T. Kavas, A. Christogerou, Y. Pontikes, G. N. Angelopoulos, "Valorisation of different types of boron-containing wastes for the production of lightweight aggregates", Journal of Hazardous Materials, 2011, 185 (2-3), 1381-1389. 

A. Anastasiou, Ch. Christoglou, G. N. Angelopoulos, "Formation of Aluminide Coatings on Ni and Austenitic 316 Stainless Steel by a Low Temperature FBCVD Process", Surface and Coating Technology, 2010, 204 (14), 2240-2245. 

 

A. Christogerou, T. Kavas, Y. Pontikes, C. Rathossi, G. N. Angelopoulos,"Evolution of microstructure, mineralogy and properties during firing of clay based ceramics with borates", Ceramics International, 2010, 36, 567-575. 

I. M. Anagnostopoulos, V. E. Stivanakis, G. N. Angelopoulos, D. C. Papamantellos, "Valorization of lignite combustion residues and ferroalumina in the production of aggregates", Journal of Hazardous Materials, 2010, 174, 506-511.

G. Triantafyllou, G.N. Angelopoulos, P. Nikolopoulos, "Surface and grain boundary energies as well as surface mass transport in polycrystalline Yttrium oxide (Y2O3)". Journal of Materials Science, 2010, 45, (8), 2015-2022. 

 

2000 -2009

I. Vangelatos, G. N. Angelopoulos and D. Boufounos, “Utilization of ferroalumina as raw material in the production of Ordinary Portland Cement”. Journal of Hazardous Materials, 2009, 168, 473-478.

I. M. Anagnostopoulos and V. E. Stivanakis, Utilization of lignite power generation residues for the production of lightweight aggregates. Journal of Hazardous Materials, 2009, 163, (1), 329-336.

Y. Pontikes and G. N. Angelopoulos, “Effect of firing atmosphere and soaking time on heavy clay ceramics with addition of Bayer’s process bauxite residue”, Advances in Applied Ceramics, 2009, 108, (1), 50-56.

Y. Pontikes, C. Rathossi, P. Nikolopoulos, G. N. Angelopoulos, D. D. Jayaseelan and W. E. Lee, “Effect of firing temperature and atmosphere on sintering of ceramics made from Bayer process bauxite residue”. Ceramics International, 2009, 35, (1), 401-407.

A. Christogerou, T. Kavas, Y. Pontikes, S. Koyas, Y. Tabak and G. N. Angelopoulos, “Use of boron wastes in the production of heavy clay ceramics”. Ceramics International, 2009, 35, (1), 447-452.

X. Mantzouris, G. Triantafyllou, F. Tietz, P. Nikolopoulos, "Physical characterization of Y2O3-CeO2-TiO2 (YCT) mixed oxides and Ni/YCT cermets as anodes in solid oxide fuel cells". Journal of Materials Science, 2008, 43:7057-7065

Y. Pontikes, P. Nikolopoulos and G.N. Angelopoulos, “Thermal behaviour of clay mixtures with bauxite residue for the production of heavy-clay ceramics”, Journal of the European Ceramic Society, 2007, 27(2-3), 1645–1649.

Y. Pontikes, L. Esposito, A. Tucci and G.N. Angelopoulos, “Thermal behaviour of clays for traditional ceramics with soda–lime–silica waste glass admixture”, Journal of the European Ceramic Society, 2007, 27(2-3), 1657-1663

Y. Pontikes, A. Christogerou, G. N. Angelopoulos, E. Rambaldi, A. Tucci, L. Esposito, “Use of Soda-Lime-Silica Scrap glass in the ceramic industry”, Glass Technology, 2005, 46(2), 200-206.

Y. Pontikes, G. N. Angelopoulos, U. Kim, H. Lee, W. Carty. “On the plasticity of clay mixtures with Bauxite Residue of the Bayer process”, Advances in Science and Technology, 2006, 45, 2240-2245.

Y. Pontikes, Ι. Vangelatos, D. Boufounos, D. Fafoutis, G. N. Angelopoulos. “Environmental aspects on the use of Bayer’s process Bauxite Residue in the production of ceramics”, Advances in Science and Technology, 2006, 45, 2176-2181.

E. Dourdounis, V. Stivanakis, G.N. Angelopoulos, C. Chaniotakis, E. Frogoudakis, D. Papanastasiou, D.C. Papamantellos “High Alumina Cement production from FeNi-ERF slag, limestone and diasporic bauxite”, Cement and Concrete Research, 2004, 34, 941-947.

Y. Pontikes, A. Christogerou, G. Angelopoulos, A. Tucci, L. Esposito, “On the addition of soda-lime scrap glass for heavy clay ceramics’ production”, C+CA, 2004, 5-6, 200-206.

P. Stavropoulos, C. Palagas, G.N. Angelopoulos, D.C. Papamantellos, S. Couris, “A comparative study of pico and nanosecond laser produced plasmas for analytical applications”, Spectrochimica Acta Part B59 (2004) 1885-1892.

Ch. Christoglou, N. Voudouris, G.N. Angelopoulos, “Deposition of aluminium on magnesium by a CVD process”, Surface and Coatings Technology, 2004, 184, 149-155.

Ch. Christoglou, C. Bulancea, G.N. Angelopoulos, “Formation of aluminide coatings by a low temperature FBCVD process”, Steel Research Int., 2004, 75, No.6, 419-424

P. Lampropoulou, I.E. Alexopoulou, G.N. Angelopoulos, D.C. Papamantellos, G. Rentizelas, F. Cappel “Agglomeration of Dust and Sludge of the FeNi production” Erzmetall, 2003, 56 Nr. 9, 551-557.

Ch. Christoglou, N. Voudouris, G. N. Angelopoulos, “Formation and modelling of aluminide coatings on iron by a fluidized bed CVD process” Surface and Coatings Technology, 2002, 155, 51-58.

C. Catana, V. S. Gotsis, E. Dourdounis, G. N. Angelopoulos, D. C. Papamantellos and K. Mavrommatis “Very Fine Bubbling (VFB) Technology: Process metallugical evaluation and application” Steel Research 2002, 73, No. 12, p. 513-521.

Ch. Christoglou, N. Voudouris, G.N. Angelopoulos, "Formation and modelling of aluminide coatings on iron by a fluidised bed CVD process", Surface and Coatings Technology 155, 2002, 51-58.

Ch. Christoglou, G.N. Angelopoulos, "Deposition of Cr, Al coatings on Ni by means of a PB and FB CVD process", J. Phys. IV, France, 2001, 1125-1130.

N. Voudouris, Ch. Christoglou, G.N. Angelopoulos, "Formation of aluminide coatings on nickel by a fluidised bed CVD process", Surface and Coatings Technology, 2001, 141, 275-282.


1990 - 1999

 

Ν. Voudouris, G. N. Angelopoulos: “Modeling of titanium carbide coating growth on carbon steels by conventional and fluidized bed CVD”, Surface & coatings technology 1999, vol. 115, 1, 38-44

Ν. Voudouris, G. N. Angelopoulos: “Aluminide coatings on metals by a fluidized bed CVD process”, High Temp. Material Processes 1998, 2, 165-175.

Tsoga, S. Ladas and P. Nikolopoulos, “Correlation between the oxidation state of α-SiC and its wettability with non reactive (Sn) or reactive (Ni) metallic phases”, Acta Mater. 1997, 45, 3515-3525.

G. N. Angelopoulos, S. Kinkel, N. Voudouris, “Thermochemical aspects on the formation of Ti-bearing coatings in a fluidized bed CVD process”, Surface and Coatings Technology, 78, 1996, 72-77.

Tsoga, A. Naoumidis and P. Nikolopoulos, “Wettability and interfacial reactions in the systems Ni/YSZ and Ni/Ti - TiO2/YSZ”, Acta Mater. 1996, 44, 3679-3692.

Tsoga and P. Nikolopoulos, “Surface and grain boundary energies in yttria-stabilized zirconia (YSZ-8 mol%)”, J. Mater. Sci. 1996, 31, 5409-5413.

S. Agathopoulos, P. Nikolopoulos, A. Salomoni, A. Tucci and I. Stamencovic, “Preparation and properties in binary oxides bioceramics”, J. Mater. Sci.: Materials in Medicine 1996, 7, 629-636.

A.Tsoga, P. Nikolopoulos, A. Naoumidis, “Modified YSZ/Ni structures with improved stability”, Ionics 1996, 2, 427-434.

D. Sotiropoulou, S. Agathopoulos and P. Nikolopoulos, “Work of adhesion in ceramic-oxide/liquid-metal systems”, Journal of Adhesion Science and Technology 1996, 10, 989-998.

A.S. Diamantopoulos, G.N. Angelopoulos and D.C. Papamantellos, “Investigation of the sedimentation of FeNi fine grains entrained in ERF slag”, Steel Research 67, 1996, 179-187.

S. Agathopoulos and P. Nikolopoulos, “Wettability and interfacial interactions in bioceramic/body liquid systems”, Journal of Biomedical Materials Research 1995, 29, 421-429.

S. Kinkel, G.N. Angelopoulos, D.C. Papamantellos, W. Dahl, “Feasibility of fluidized bed cvd for the formation of protective coatings”, Steel Research 1995, 66, 7, 318-324.

Tsoga and P. Nikolopoulos, “Groove angles and surface mass transport in pollycrystalline Al2O3”, J. Am. Ceram. Soc. 1994, 77 (4), 954-960.

I.E. Alexopoulou, G.N. Angelopoulos, D.C. Papamantellos, F. Cappel and G. Rentizelas, “The dust recycling problem of the FeNi production at Larymna Greece, Part I: Operational and experimental results”, Erzmetall 1994, 47, 9, 562-571

I.E. Alexopoulou, G.N. Angelopoulos, D.C. Papamantellos and G. Rentizelas, “The dust recycling problem of the FeNi production at Larymna Greece. Part ii: New perspecrtives and proposals”, Erzmetall 1994, 47, 11, 651-657

P. Nikolopoulos, S. Agathopoulos and A. Tsoga, “A method for the calculation of interfacial energies in Al2O3 and ZrO2/liquid-metal and -alloy systems”, J. Mater. Sci. 1994, 29, 4393-4398.

D. Sotiropoulou and P. Nikolopoulos, “Work of adhesion in ZrO2-liquid metal systems”, J. Mater. Sci. 1993, 28, 356-360

P. Nikolopoulos, S. Agathopoulos, G.N. Angelopoulos, A. Naoumidis and H. Grubmeier, ”Wettability and interfacial energies in SiC-liquid metal systems”, J. Mater. Sci., 1992, 27, 139-145.

P. Nikolopoulos and S. Agathopoulos, “Interfacial phenomena in Al2O3-liquid metal and Al2O3-liquid alloy systems”, J. Eur. Ceram. Soc. 1992, 10, 415-424.

D.Sotiropoulou and P. Nikolopoulos, “Surface and grain-boundary energies of cubic zirconia”, J. Mater. Sci., 1991, 26, 1395-1400.

G.Ondracek, P. Nikolopoulos, J. Stamenkovic, and E.H. Toscano, “Man, medicine and materials: biomaterials”, Ceramica Acta, 1990, 7-28.

G.N. Angelopoulos, D.C. Papamantellos, “Contribution to the investigation of Nickel transfer between Nickel-bearing electro-reduction furnace slags and Iron-Nickel bath”, Steel Research, 1990, 61, 1, 18-13

D.C. Papamantellos, G.N. Angelopoulos, K. Mavrommatis, “Testing and applications of a process model in the metallurgical production praxis of ferronickel from laterites”, Steel Research, 1990, 61 12, 598-602


1980 – 1989


G.N. Angelopoulos, S. Pavlou, D.C. Papamantellos, “Simplified model of the electro reduction furnace process for the production of ferronickel from laterite ores”, Erzmetall, 1989, 42 Nr.3, 107-113

G. Angelopoulos, U. Jauch and P. Nikolopoulos, “Benetzungswinkel und Grenflaechenenergien der geschmolzenen Metalle Bi, Pb, Cu und Ni in Kontakt mit festem Al2O3”, Mat.-wiss.u. Verkstofftech. 1988, 19, 168-172.

P. Nikolopoulos, D. Sotiropoulou and G. Ondracek, “Temperature-dependence of interfacial energies between solid oxide ceramics and liquid metals”, J. Thermal Anal. 1988, 33, 633-642.

P. Nikolopoulos and D. Sotiropoulou, “Wettability between zirconia ceramics and the liquid metals copper nickel and cobalt”, J. Mater. Sci. Lett. 1987, 71, 1429-1430.

P. Nikolopoulos, “Surface grain boundary and interfacial energies in Al2O3 and Al2O3-Sn, Al2O3-Co systems”, J. Mater. Sci. 1985, 20, 3993-4000.

P. Hofmann, D. Kerwin-Peck and P. Nikolopoulos, “Explanation of the uo2/zircaloy-4 reaction layer sequence in terms of the total interfacial energy of the system”, J. Nucl. Mater. 1984, 124, 114-119.

Nikolopoulos, P. Hofmann and D. Kerwin-Peck, “Determination of the interfacial energy and work of adhesion in the UO2/Zircaloy-4 diffusion couple”, J. Nucl. Mater. 1984, 124, 106 113.

P. Hofmann, D. Kerwin-Peck, P. Nikolopoulos, “Physical and chemical phenomena associated with the dissolution of solid UO2 by molten zircaloy”, in “Zirconium in the Nuclear Industry”, Eds D.G. Franklin and R.B. Adamson, ASTM-Special Technical Publication 1984, 824, 810-834.

P. Nikolopoulos and G. Ondracek, “Zur Porositaetsabhaengigkeit der feldeigenschaften von Sintermetallen”, Z. Metallkde 1983, 74, 49-59.

P. Nikolopoulos and G. Ondracek, “Conductivity bounds for porous nuclear fuels”, J. Nucl. Mater. 1983, 114, 231-233.

P. Nikolopoulos and G. Ondracek, “Field property bounds for porous sintered ceramics”, J. Amer. Ceram. Soc. 1983, 66, (4), 238-241.

P. Nikolopoulos and G. Ondracek, “Zur Bestimmung von oxide -metall Phasengrenzflaechenenergien”, Z. Werkstofftechnik, 1982, 13 60-69.

P. Nikolopoulos, E. Nold, H. Schneider and B.Schulz, “The influence of sodium vapour on the wetting of UO2-stainless-steel 1.4970 (liquid) and its interpretation using scanning auger spectroscopy”, J. Nucl. Mater. 1981, 101 277-287

P. Nikolopoulos and G. Ondracek, “Bestimmung der Dichten in Kernscmelzen”, Atomwirtschaft Atomtechnik, 1981, 12, 661-663.

P. Nikolopoulos and G. Ondracek, “Interfacial energies between uraniumdioxide and liquid metals”, J. Nucl. Mater., 1981, 98, 306-312.

D. Papamantellos, “Application of principal metallurgical considerations for the reblow in the ΟΒΜ-process”, 7th Int. OBM-Meeting, Rotach-Egern Oct. 20-24, 1980.

1970 - 1979

P. Nikolopoulos and B. Schulz, “Density thermal expansion of stainless steel and interfacial properties of UO2-stainless steel above 1960K”, J. Nucl. Mater., 1979, 82, 172-178.

W. Klemp, D. Papamantellos, “Influence of scrap quality on the reliability of achiving the aimed analysis and temperature at turndown”, 6th Int. OBM-Meeting, Rotach-Egern Oct. 22-25, 1979, B1-18.

D. Papamantellos and W.Klemp, “Metal-slag reactions in the ΟΒΜ process”, 6th International OBM-Meeting, Rotach-Egern, Oct. 22-25, 1979, A1-A21.

P. Nikolopoulos, S. Nazare and F. Thuemmler, “Erwiderung zu den comments on “Surface grain boundary and interfacial energies in UO2-Ni”, J.Nucl. Mater., Letter, 1978, 78, 213-214.

W. Hunger, S. Nazare and P. Nikolopoulos, “Einfluss der Reaction in UAl2-Al-dispersions-brennstoffen auf mechanische Eigenchaften”, Atomkernenergie, 1978, 31, 156-159.

K. Brotzmann and D. Papamantellos, “Interesting aspects of the ΟΒΜ-metallurgy”, International Iron and Steel Congress Proceedings, Chicago, April 16-20, 1978.

P. Nikolopoulos, S. Nazare and F. Thuemmler, “Surface grain boundary and interfacial energies in UO2 and UO2-Ni”, J. Nucl. Mater. 1977, 71, 89-94.

G. Rentizelas, K.W. Lange, D. Papamantellos, “Einfluss von Legierungselementen auf die Spulentgasung von Stahlschmelzen mit Argon”, Arch. Eisenhuttenwesen, 1977, 48 261-266.

D. Papamantellos, “Anwendung von Sauerstoff und Argon beim OBM-Verfahren”, Technische Mitteilungen/Haus der Technik, Essen 12/1976, 634-641.

G. Rentizelas, K. Lange, D. Papamantellos, “Experimentelle Untersuchung der spulentgasung von Stahlschmelzen mit Argon”, Archiv fur das Eisenhuttenwesen, 1976, 47, 601-606.

H. Knuppel, K. Brotzmann, D. Papamantellos, “Grundlagen der OBM – metallurgie”, Archiv fur das Eisenhuttenwesen, Demnachst.

W. Lange, D. Papamantellos, “Mass transfer between ascending bubbles and iron alloying elements”, In “Kinetics of Metallurgical Processes in Steelmaking” Verlag Stahleisen, Dusseldorf 1975, 306-313.

D. Papamantellos, H. Leygraf, “Quantitative description of metallurgical refining processes”, In “Kinetics of Metallurgical Processes in Steelmaking” Verlag Stahl und Eisen, Dusseldorf 197, 557-571.

D. Papamantellos, “Considerations on the batch-operated metallurgical reactor batch reactor”, In “Kinetics of Metallurgical Processes in Steelmaking” Verlag Stahleisen, Dusseldorf 1975, 136-153.

D. Papamantellos, P.K. Saha und H. Schenck, “Die bedeutung geringer Arsengehalte in ferronickel fur die zukunftige nickelversorgung der Stahlindustrie”, Archiv fur das Eisenhuttenwesen 1974, 45, 373-380.

D. Papamantellos und H. Leygraf, “Quantitative Beschreibung metallurgischen Raffinationsprozesse”, Physikalische Chemie der Eisenhuttenprozesse, Verlag Stahleisen, Dusseldorf, 1972, 585-599. Publishers: W. Dahl, K.W. Lange, D. Papamantellos.

D. Papamantellos, “Uberlegungen zum chargenweise betriebenen metallurgischen Ruehrkessel (Batchreaktor)”, Physikalische Chemie der Eisenhuttenprozesse, Verlag Stahleisen, Dusseldorf, 1972, 142-160. Publishers: W. Dahl, K.W. Lange, D. Papamantellos.

K.W. Lange und D. Papamantellos, “Stoffaustausch zwischen aufsteigenden Blasen und Eisenbegleitern”, Physikalische Chemie der Eisenhuttenprozesse, Verlag Stahleisen, Dusseldorf, 1972, 320-327. Publishers: W. Dahl, K.W. Lange, D. Papamantellos

D. Papamantellos, “Modelimassige Erfassung und Optimierung metallurgischer Reaktionen”, Archiv fur das Eisenhuttenwesen, 1972, 43, 127-134

K.W. Lange, K. Okohira, D. Papamantellos und H. Schenck, “Spulentgasung von Stahlschmelzen mit Kohlenmonoxid oder Argon”, Archiv fur das Eisenhuttenwesen, 1971, 42.

D. Papamantellos, K.W. Lange, K. Okohira and H. Schenck, “A mathematical approach for the mass transfer between liquid steel and an ascending bubble”, Metallurgical Transactions, 2, 1971, 3135-3144.

K. Okohira, D. Papamantellos, K.W. Lange und H. Schenck, “Beitrag zur simulierung der spulgasbehandlung Untersuchung der Einzelparameter”, Archiv fur das Eisenhuttenwesen 42, 1971, 311-317.

D. Papamantellos, K. W. Lange, K. Okohira und H. Schenck, “Beitrag zur simulierung der spulgasbehandlung Schlubfolgerungen”, Archiv fur das Eisenhuttenwesen, 1971, 42, 319, 323.

M. Ohji, D. Papamantellos, K.W. Lange und H. Schenck, “Stoffaustausch zwischen aufstelgenden kalottenformigen Blasen und in eisenchmelzen gelosten Elementen”, Archiv fur das Eisenhuttenwesen, 1970, 41, 321-331.

< 1970


H. Schenck, M.G. Frohberg und D. Papamantellos, “Erganzende Ableitungen zum Stoffaustausch zwischen Schlacke und Metall bei permanent und bei transitorisch wirksamen Phasen”, Archiv fur das Eisenhuttenwesen, 37, 1966, 13-19.

H. Schenck, M.G. Frohberg und D. Papamantellos, “Untersuchungen zur Entfernung von Chrom aus Roheisen”, Stahl und Eisen, 1966, 86, 129-37

M.G. Frohberg, D. Papamantellos und E. Hanert, “Untersuchungen zur Kinetik der Entchromung von flussigem Roheisen”, Gieserei Techn. Wiss. Beihefte 1966, 18, 83-89

M.G. Frohberg, D. Papamantellos und E. Hanert, “Die Ermittlung der optimalen Bedingungen eines metallurgischen Prozesses, durchgefuhrt am Beispiel der Entfernung von Chrom aus kohlentoffhaltigen Eisenchmelzen”, Archiv fur das Eisenhuttenwesen 1967, 38, 91-98.

M.G. Frohberg, D. Papamantellos und P. Patel, “Die elektrolytische Dissoziation flussiger Schlacken und ihre Bedeutung fur metallurgische Reaktionen”, Archiv fur das Eisenhuttenwesen, 1968, 39, 651-656

M.G. Frohberg, D. Papamantellos und P. Patel, “Stofftransport zwischen nichtmischbaren Flussigkeiten”, Chemie Ingenieur Technik, 1968, 40, 981-988.

M.G. Frohberg, D. Papamantellos und E. Hanert, “Untersuchungen zur Verteilung des Chroms zwischen Kalk-Kieselsaure-Tonerde-Schlacen und kohlenstoffgesatigtem flussigem Eisen unter besonderer berucksichtigung des Einflusses von Silizium”, Archiv fur das Eisenhuttenwesen, 1969, 40, 15-17

K.W. Lange, M. Ohji, D. Papamantellos und H. Schenck, “Untersuchungen des Stoffaustausches zwischen aufsteigenden kugelformigen Blasen und flussigen Metallschemelzen”, Archiv fur das Eisenhuttenwesen 1969, 40, 99-107

P. Patel, M.G. Frohberg und D. Papamanatellos, “Experimental studies of mass transfer between two immiscible liquids”, Transactions Aime 1969, 245, 855-859.

 

 

Publications (other)


G. Rentizelas, K. Lange, D. Papamantellos, “Experimental study of steel bath degasing by Argon blasting into the liquid mass”, T.E.E., 4/78, in Greek.

G. Rentizelas, K. Lange, D. Papamantellos, “Influence of the mixture elements on the degasing by Argon blasting of steel baths”, T.E.E., Technika Chronika, 4/79, in Greek.

V. Stivanakis, D. Papamantellos, “Contribution in the utilization of Megalopolis flying ash in the cement industry”, Technika Chronika (1982), in Greek.

G.N. Angelopoulos, N. Voudouris, “Application of a fluidized bed CVD process for the production of protective coatings on steels”, TECHNIKA, February 1996, 113, 84-89, in Greek.

D. Papamantellos, “The latest developments in steelwork”, T.E.E. 19-1-1980, p. 1-18, in Greek.

Sarantoglou G.X., “Investigation of the properties of mass production high quality steels”, E.E.T.E.E., Sc. Field C, 1981, 5-26, in Greek.

Sarantoglou G.X., D. Papamantellos, “Examination of the influence of Si, Mn, P, S, Al, Cr, Ni, As, Sn and N on the weldability and transition of ST35 steel”, Sc. Field C, 1983, 61-85, in Greek.

Sarantoglou G.X., “Mechanical properties and crystallographic formation of steels with low carbon and nitrogen concision”, Doctorate Dissertation, Patras, 1983, in Greek.